Barrel wells are used in washrooms, in the food industry and in preparation kitchens in front of dams.
Domestic stainless steel horizontal discharge barrel well is equipped with a perforated SS strainer lid and a removable SS septic tank with a capacity of approx. 6 litres. The water trap is fitted with a rubber stopper to facilitate cleaning
Depending on the flooring material, the wells are fitted with fittings suitable for plastic mats, ceramic tiles or solid floors.
When planning the installation of a barrel well, it is important to ensure that there are no furniture structures above the drain that could prevent lifting the large sediment bucket inside it.
A lateral connection can be welded to the well, either on the side of the well or through the sediment bucket. The sediment bucket can be connected to the Kavika floor basin at the factory.
On request, the well is also available in acid-resistant steel. (HST)
| Templates | Departure from | Flooring material | Plumbing number | Flow rate |
|---|---|---|---|---|
| 9082/1 | DN75 | Matto | 3305158 | 2,8 l/s |
| 9082/3X | DN75 | Tile | 3305159 | 2,8 l/s |
| 9082/4 | DN75 | Massa | 3305160 | 2,8 l/s |
| Templates | Departure from | Flooring material | Plumbing number | Flow rate |
|---|---|---|---|---|
| 9083/1 | DN110 | Carpet | 3305162 | 3,6 l/s |
| 9083/3X | DN110 | Tile | 3305163 | 3,6 l/s |
| 9083/4 | DN110 | Mass | 3305164 | 3,6 l/s |